Factory For Electronic Radiator Thermostat - Rising Stem Resilient Soft Seated Gate Valves DIN 3352-F4 – SNODE

Short Description:

Components: 1.Valve body: Ductile iron GGG50 2.Bonnet: Ductile iron GGG50 3.Gland: Ductile iron GGG50 4.Disc: Ductile iron GGG50+EPDM 5.Stem Nut:Brass GGG50 6.Stem:2Cr13 7.Snap ring:Brass 8.O-ring: EPDM silicone 9.Hand wheel:Ductile iron GGG50 10.Seal:EPDM 11.Bolt: CS SS 12.Screw: SS Technical Standards: 1.Design standards: DIN3352 F4 2.Structural length: DIN3202 3.Flange Connection: DIN EN1092-2 Product Attributes: 1.Work Pressure: PN 1.0/1.6Mpa 2.Test Pressure: Shell—1.5/2.4Mpa, Seal...

Send email to us Download as PDF

Product Detail

Product Tags

Feedback (2)

With state-of-the-art technologies and facilities, strict good quality regulate, reasonable cost, exceptional assistance and close co-operation with prospects, we're devoted to supplying the top benefit for our customers for Fm Ul Fire Hydrant Outdoor Underground, Bathroom Brass Floor Drain, Cast Iron Heating Gas Stove, We are sincerely looking forward to cooperate with buyers all around the world. We imagine we will satisfy you. We also warmly welcome shoppers to visit our organization and purchase our merchandise.

Factory For Electronic Radiator Thermostat - Rising Stem Resilient Soft Seated Gate Valves DIN 3352-F4 – SNODE Detail:

Technical Standards:
1.Design standards: DIN3352 F4
2.Structural length: DIN3202
3.Flange Connection: DIN EN1092-2

Product Attributes:
1.Work Pressure: PN 1.0/1.6Mpa
2.Test Pressure: Shell—1.5/2.4Mpa, Seal—1.1/1.76Mpa
3.Work Temperature: Below 120?
4.Applicable medium:Water

Components:
1.Valve body: Ductile iron GGG50/40
2.Bonnet: Ductile iron GGG50/40
3.Stand: Ductile iron GGG50/40
4.Wedge: Ductile iron GGG50/40+EPDM
5.Stem Nuts:GGG50/40
6.Stem:2Cr13
7.Gland:5mm thickness steel
8.O-ring:silica gel
9.Hand wheel:Ductile iron GGG50/40
10.Lift nuts:EPDM
11.Bolts: CS SS
12.Screw: SS

Technical Standards:
1.Design standards: DIN3352 F4
2.Face to Face: DIN3202
3.Flange Connection: DIN2633
4.Test Standard: DIN3230

Product Attributes:
1.Work Pressure: PN 1.0/1.6Mpa
2.Test Pressure: Shell—1.5/2.4Mpa, Seal—1.1/1.76Mpa
3.Work Temperature: Below 120?
4.Medium:Water

Product detail pictures:

Our enterprise since its inception, constantly regards product good quality as organization life, constantly improve production technology, strengthen merchandise high quality and continuously strengthen enterprise total good quality administration, in strict accordance with all the national standard ISO 9001:2000 for Factory For Electronic Radiator Thermostat - Rising Stem Resilient Soft Seated Gate Valves DIN 3352-F4 – SNODE, The product will supply to all over the world, such as: Mexico, Palestine, Albania, With the support of our highly experienced professionals, we manufacture and supply best quality products. These are quality tested at various occasions to ensure only flawless range is delivered to customers, we also customize the array as per the need of customers to meet the requirement of customers.

End Cap With Eccentric Hole