Factory making Gate Valve Lockout - Rising Stem Resilient Soft Seated Gate Valves DIN 3352-F4 – SNODE Detail:
Components:
1.Valve body: Ductile iron GGG50
2.Bonnet: Ductile iron GGG50
3.Gland: Ductile iron GGG50
4.Disc: Ductile iron GGG50+EPDM
5.Stem Nut:Brass GGG50
6.Stem:2Cr13
7.Snap ring:Brass
8.O-ring: EPDM silicone
9.Hand wheel:Ductile iron GGG50
10.Seal:EPDM
11.Bolt: CS SS
12.Screw: SS
1.Valve body: Ductile iron GGG50
2.Bonnet: Ductile iron GGG50
3.Gland: Ductile iron GGG50
4.Disc: Ductile iron GGG50+EPDM
5.Stem Nut:Brass GGG50
6.Stem:2Cr13
7.Snap ring:Brass
8.O-ring: EPDM silicone
9.Hand wheel:Ductile iron GGG50
10.Seal:EPDM
11.Bolt: CS SS
12.Screw: SS
Technical Standards:
1.Design standards: DIN3352 F4
2.Structural length: DIN3202
3.Flange Connection: DIN EN1092-2
1.Design standards: DIN3352 F4
2.Structural length: DIN3202
3.Flange Connection: DIN EN1092-2
Product Attributes:
1.Work Pressure: PN 1.0/1.6Mpa
2.Test Pressure: Shell—1.5/2.4Mpa, Seal—1.1/1.76Mpa
3.Work Temperature: Below 120?
4.Applicable medium:Water
1.Work Pressure: PN 1.0/1.6Mpa
2.Test Pressure: Shell—1.5/2.4Mpa, Seal—1.1/1.76Mpa
3.Work Temperature: Below 120?
4.Applicable medium:Water
Components:
1.Valve body: Ductile iron GGG50/40
2.Bonnet: Ductile iron GGG50/40
3.Stand: Ductile iron GGG50/40
4.Wedge: Ductile iron GGG50/40+EPDM
5.Stem Nuts:GGG50/40
6.Stem:2Cr13
7.Gland:5mm thickness steel
8.O-ring:silica gel
9.Hand wheel:Ductile iron GGG50/40
10.Lift nuts:EPDM
11.Bolts: CS SS
12.Screw: SS
1.Valve body: Ductile iron GGG50/40
2.Bonnet: Ductile iron GGG50/40
3.Stand: Ductile iron GGG50/40
4.Wedge: Ductile iron GGG50/40+EPDM
5.Stem Nuts:GGG50/40
6.Stem:2Cr13
7.Gland:5mm thickness steel
8.O-ring:silica gel
9.Hand wheel:Ductile iron GGG50/40
10.Lift nuts:EPDM
11.Bolts: CS SS
12.Screw: SS
Technical Standards:
1.Design standards: DIN3352 F4
2.Face to Face: DIN3202
3.Flange Connection: DIN2633
4.Test Standard: DIN3230
1.Design standards: DIN3352 F4
2.Face to Face: DIN3202
3.Flange Connection: DIN2633
4.Test Standard: DIN3230
Product Attributes:
1.Work Pressure: PN 1.0/1.6Mpa
2.Test Pressure: Shell—1.5/2.4Mpa, Seal—1.1/1.76Mpa
3.Work Temperature: Below 120?
4.Medium:Water
1.Work Pressure: PN 1.0/1.6Mpa
2.Test Pressure: Shell—1.5/2.4Mpa, Seal—1.1/1.76Mpa
3.Work Temperature: Below 120?
4.Medium:Water
Product detail pictures:
Related Product Guide:
Preventing holiday fires in Highland County | En215 Radiator Valve Head
Melbourne man impales BOTH his arms on Christmas morning after falling off roof | Room Heaters Water Radiator
That has a positive and progressive attitude to customer's interest, our organization consistently improves our products quality to satisfy the demands of shoppers and further focuses on safety, reliability, environmental specifications, and innovation of Factory making Gate Valve Lockout - Rising Stem Resilient Soft Seated Gate Valves DIN 3352-F4 – SNODE, The product will supply to all over the world, such as: Bulgaria, Philippines, Greece, Our company always concentrate on the development of the international market. We've got a lot of customers in Russia , European countries, the USA, the Middle East countries and Africa countries. We always follow that quality is foundation while service is guarantee to meet all customers.
By Kristin from Poland - 2016.11.12 12:31
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Ella from Cape Town - 2016.11.29 11:09